Model 367

Model 367 (1.5″ Sanitary Tee)

Description
The housings are secured into a sanitary pipe tee with a standard flange clamp sealed with a flange gasket. The pH electrode is then inserted into the housing for on-line measurements. When using a standard sanitary tee, the sensor should be positioned such that the tip of the sensor is in the middle of the process flow. Standard and T-Pull® FermProbes® are both compatible with these housings.

These housings are also compatible with NovAseptic side ports.
Specification
  • 316L stainless steel construction
  • Serialized for traceability to mill steel specifications
  • RA32 finish with electropolish on all wetted parts
 

Ordering Information

Housing Model Class Typical Vessel Insertion Length Used With pH Electrode Models Used With Electrode Length Housing Part Number
Model 367 for 1.5″ Sanitary Tee Fitting A 90 mm (3.6″) F-615 130 mm 367-61-H075

Dimensions (Inches (mm)):