Model S410

S410 pH/ORP Sensor 3/4" Threads & Recessed Bulb

These sensors are designed for slurry applications in submersions & online.

The reference cell features a Double junction design for extended service life in harsh application. Flat bulb technology has proven results in pressure of slurry / solid particles. It is first choice for Indian market and is compatible to most of the pH meters worldwide.

Application: Slurry, waste water application

Operational:

pH Range
0 - 14 pH
Redox Range
± 5000 mV
Temperature Range
0 - 105°C
Max Pressure / Temp
150 psig at 100°C
Reference
Ag-AgCl
Wetted Materials
Ryton®, Teflon® & Glass
Standard cable length
3 meters (10 ft)
Application
In-Line & Submersion
Maximum Flow Rate
10ft (3m) per second
Chemical-resistant Wetted Materials
The large annular junction resists fouling. Also, the sealed, double-junction reference electrode is highly resistant to poisoning

Ordering Information

Please use this information to build your part number. If you need any assistance please call us on +1-949-829-5555 or 1-800-288-2833
Part No. 1 2 - 3 4 5 6 7 - 8 9 10 11 12
S4 1 0 - _ _ _ _ _ - _ _ _ _ _
 
CATEGORY SELECTION :
1-2 Body Style:
[10] Standard Insertion, No Guard, 3/4″ NPT
3 Body Material:
[R] Ryton®
[G] Grounded
4 Liquid Junction :
[T] Coaxial Teflon®
[R] Recessed Coaxial Teflon® (only available on probes without T.C.)
5-6 Measurement Electrode:
[17] pH, Flat bulb, General purpose
[43] pH, HT-4 High pH Bulb (for pH 13 and above)
[PB] Redox, Platinum Band
7 Temperature Compensator:
[0] T.C. not required
[1] 3K Ohms, used on older models of TBI/Bailey & Uniloc transmitters
[9] 301 Ohms for use with Bela make 692P, 672P, 697P
[D] Pt 100 Ohms for Rosemount (Uniloc) 1054, Beckman SoluComp, TBI/Bailey TB82 & TB84, Foxboro 870 & 874, Yokogawa and many European models
[H] Pt 1000 Ohms for Yokogawa, Conducta, Polymetron and many European models
8 Cable Type :
[A] 3 mm Low Noise Coax, for pH without built-in TC, or for Redox
[M] 5 mm Low Noise Coax, for pH without built-in TC, or for Redox
[E] Jacketed Coax w / TC leads
[N] Jacketed Coax w / TC and solution ground leads
9-10 Cable Length:
[10] 10 ft – standard length
[XX] Specify length (in feet) if other than standard (see above for price adder per foot)
11-12 Sensor Connectors :
[BC] BNC only (for use with Redox electrodes or with sensors w/o TC or solution ground)
[FB] BNC for pH and Ferrules on all other leads (for use with Terminal Block or Terminal Strip)
[FF] All Ferrule connectors (for use with Terminal Block or Terminal Strip)

Dimensions (Inches (mm)):

S410 Dimensions